WARNING. Maintenance Procedure

NOTE

Maintenance Procedure

NOTE

Misalignment of the wheel will result in abnormal wear and may result in an unsafe riding condition.

WARNING

• Tighten both chain adjuster locknuts securely.

• Tighten the axle nut (see Front/Rear Wheel Installation in the Wheels/Tires chapter).

Крутящий момент - Гайка Задней оси: 108 N · м. (11 kgf · м., 80 футов · фунт)

• Insert a the new cotter pin [A].

О When inserting the cotter pin, if the slots in the nut do not align with the cotter pin hole in the axle shaft, tighten the nut clockwise [A] up to next alignment.

OIt should be within 30 degree.

2-26 Периодический ремонт

Bend the cotter pin [A] over the nut.

• Turn the wheel, measure the chain slack again at the tight­est position, and readjust if necessary.

• Check the rear brake.

Wheel Alignment Inspection/Adjustment

• Check that the left adjuster mark [A] position should align with the same graduation [B] that the right adjuster mark position aligns with.

• If they do not, adjust the chain slack and align the wheel alignment.

О Wheel alignment can also be checked using the straightedge or string method.

Misalignment of the wheel will result in abnormal wear, and may result in an unsafe riding condition.

Drive Chain Wear Inspection

• Remove:

Chain Cover

• Rotate the rear wheel to inspect the drive chain for dam­aged rollers, loose pins and links.

• If there is any irregularity, replace the drive chain.

• Lubricate the drive chain if it appears dry.

• Stretch the chain taut by hanging a 98 N (10 kg, 20 lb) weight [A] on the chain.

• Measure the length of 20 links [B] on the straight part [C] of the chain from the pin center of the 1 st pin to the pin center of the 21st pin. Since the chain may wear unevenly, take measurements at several places.

• If any measurements exceed the service limit, replace the chain. Also, replace the front and rear sprockets when the drive chain is replaced.

Цепь двигателя Длина с 20 связями
Стандарт: 317.5 ~ 318.2 мм (12.50 ~ 12.53 в.)

Сервисный Предел: 323 мм (12.7 в.)

Периодический ремонт 2-27

Дата добавления: 2014-12-23