CAUTION. Maintenance Procedure

WARNING

Maintenance Procedure

If the drive chain wear exceeds the service limit, re­place the chain or an unsafe riding condition may result. A chain that breaks or jumps off the sprock­ets could snag on the engine sprocket or lock the rear wheel, severely damaging the motorcycle and causing it to go out of control. For safely, use only the standard chain. It is an end­less type and should not be cut for installation.

Drive Chain Lubrication

• If a special lubricant is not available, a heavy oil such as SAE 90 is preferred to a lighter oil because it will stay on the chain longer and provide better lubrication.

• If the chain appears especially dirty, clean it before lubri­cation.

[A] Apply oil

The O-rings between the side plates seal in the lu­bricant between the pin and the bushing. To avoid damaging the O-rings and resultant loss of lubri­cant, observe the following rules: Use only kerosene or diesel oil for cleaning an O -ring drive chain.

Дата добавления: 2014-12-23